- Jar with screw cap
- Safe for food containers
- Size: 4 fl.oz. = 118 ml
- Firing to 1015-1040°C
Image 1: result at 1030°C, on top of Mayco Elements EL118 Blue Grotto
Image 2: result at 1230°C, on top of Mayco Elements EL118 Blue Grotto
POTTERY CASCADE™
Pottery Cascade™ may be applied randomly or uniformly, brushed or dabbed on with a sponge. White Cascade adds a tinge of color to glazes with which they are used. Cascades are perfect for the low fire designer seeking to create the looks achieved at higher temperatures. Their variability insures that no two designs will be exactly alike.
GENERAL USE
Apply 1-2 coats with a brush or sponge, under or over another glaze. You can influence the direction of the flow or create a pattern by how you apply the glazes. Allow to dry thoroughly. Fire to 1015-1040°C. To prevent the glaze from running off your vertical pieces do not apply Pottery Cascades to the bottom third of the piece. Vertical pieces require more attention to this detail than horizontal pieces.
HELPFUL HINTS
- Avoid applying Pottery Cascade™ on lower third of a piece, as glaze will move.
- PC-601 Clear Cascade is the most fluid of the Cascade products, requiring care in application.
- PC-602 White Cascade moves less than Clear Cascade.
- Pottery Cascade™ are luster compatible.
- We advise against dipping your brush directly into the jar to avoid contamination, particularly if you are using one brush to layer Pottery Cascades over other glazes.
- Pottery Cascade™ glazes were designed to mature at 1015°C. Make sure the glaze has dried thoroughly prior to firing. A medium ramp/firing rate is recommended (120°C per hour).